Eagle Trace, FL Mold Damage Remediation

While Eagle Trace is not a large community, neighboring areas hold some of the region’s most visited retail sites, such as Lakeview Center Mall and businesses on Lakeview Drive. As you might suspect, pressing humidity concerns during the wet seasons of the year impact area properties with dampness and higher moisture content. Elevated humidity inside low-traffic areas like crawl spaces or attics can turn into active mold colonization without intervening action by remediation specialists.

Mold Damage Repairs and Remediation Options for Eagle Trace 

Because we have a division of building trade professionals available to respond alongside our remediation technicians, we can provide a vast spectrum of action when recovery is necessary. One of the primary remediation approaches when porous and sensitive materials become hosts for colonies is controlled demolition. Despite discarding deteriorated materials, our contractors can quickly rebuild and reconstruct removed structural areas after completing other remediation efforts. For materials that do not require removal, there are other remediation solutions, including: 

  • Surface sanding
  • Abrasive cleaning
  • Dry ice blasting

Odor Removal for Eagle Trace Homes After Mold Damage

There are harsh smells to overcome after a mold damage situation in your home. Considering how widespread these threats can become and that materials can absorb musty odors, the deodorization process is vital to finalizing restoration and remediation. Air scrubbers can reduce the severity of these conditions, while foggers and hydroxyl machines eliminate the lingering scent.

Our main service page has more on SERVPRO’s mold remediation process.  

SERVPRO of West Coral Springs / West Parkland

If You See Signs of Mold, Call Us Today – (954) 973-4130

Understanding Mold

Microscopic mold spores exist almost everywhere, outdoors and indoors, making it impossible to remove all mold from a home or business. Some restoration businesses advertise “mold removal” and even guarantee to remove all mold, which is a fallacy. Consider the following mold facts:

  • Mold is present almost everywhere, indoors and outdoors.
  • Mold spores are microscopic and float along in the air, and may enter your home through windows, doors, or AC/heating systems or even hitch a ride indoors on your clothing or on a pet.
  • Mold spores thrive on moisture. Mold spores can quickly grow into colonies when exposed to water. These colonies may produce allergens, irritants, and toxins. 
  • Before mold remediation can begin, any sources of water or moisture must be addressed. Otherwise, the mold may return. 
  • Mold often produces a strong, musty odor and can lead you to possible mold problem areas.
  • Even higher-than-normal indoor humidity can support mold growth. Keep indoor humidity below 45 percent.

Faster to Any Size Disaster

Mold spreads quickly, so a minor mold infestation can quickly escalate into a major problem. We’re dedicated to responding immediately when you contact us. A fast response lessens the damage, limits further damage, and reduces cost.

Locally Owned, with National Resources

SERVPRO of West Coral Springs / West Parkland is locally owned and operated, so we are part of the Eagle Trace community too. When you have a water or mold damage issue, we’re already nearby and ready to help. We’re also part of a network of over 2230, including special Disaster Recovery Teams placed strategically throughout the country to respond to large-scale fire, water, and storm disasters.

We are proud to serve our local communities:

Highly Trained Water and Mold Restoration Specialists

We specialize in water and mold damage restoration, with advance training in restoration techniques and the experience and specialized equipment to quickly restore your property.  Learn about our water damage training and certificates.

The Mold Remediation Process

Every mold damage scenario is different and requires a unique solution, but the general mold remediation process stays the same. The steps listed below illustrate our “typical” process:

Step 1: Emergency Contact - (954) 973-4130

We’re available 24 hours, 7 days a week to answer your phone call. Our consultant will guide you through this process, asking questions that will allow us to better understand your situation and to determine the needed equipment and personnel.

Step 2: Inspection and Mold Damage Assessment

We carefully inspect your property for visible signs of mold. Mold feeds on cellulose and water and can be hidden from plain view. We use various technologies to detect mold and hidden water sources.

Step 3: Mold Containment

Our professionals use various containment procedures to prevent the spread of mold. We may use advanced containment procedures like negative air chambers to isolate the contaminated area with physical barriers and negative air pressure to keep the mold spores from spreading during the cleanup process. All fans and heating and cooling systems will be turned off to prevent the spread of mold.

Step 4: Air Filtration

We use powerful air scrubbers, HEPA vacuums, and other filtration equipment to remove microscopic mold spores out of the air. This air filtration process and our mold containment process help to prevent the spread of these mold spores while the mold remediation is in process.

Step 5: Removing Mold and Mold-Infested Materials

Depending on the amount of mold growth and the types of surfaces involved, the mold remediation process can vary significantly. In general, we’ll use antifungal and antimicrobial treatments to eliminate mold colonies and to help prevent new colonies from forming. Depending on the severity of the infestation, we may need to remove drywall, carpeting, and other porous materials.

Step 6: Cleaning Contents and Sanitizing

SERVPRO of West Coral Springs / West Parkland will use a variety of cleaning techniques and products to clean your furnishings and personal belongings. Since mold infestations also cause a persistent musty odor, our professionals are also trained to remove odors and provide deodorization using fogging equipment.

Step 7: Restoration

Depending on the level of mold damage, drywall, subfloors, and other building materials may have been removed. Restoration may involve minor repairs, such as replacing drywall, painting, and installing new carpet; or it may entail major repairs such as the reconstruction of various areas or rooms in a home or business. The restoration step gets your home or business back to normal.

SERVPRO knows Mold

SERVPRO of West Coral Springs / West Parkland has the expertise to make any mold problem a memory in Eagle Trace, FL. We have seen the distress homeowners experience upon finding mold at their property. SERVPRO can help calm any mold concerns. Our trained professionals have the equipment and knowledge it takes to properly remediate mold. Call (954) 973-4130 - We are ready and waiting to respond to your emergency.